1.Table plasma cutting machine has a better cutting quality. What affect the cutting quality are scum, heat affected zone, top edge fillet and cutting angle. Plasma cutting machine is better than flame cutting machine especially in the scum and heat affected areas.
2.Table plasma cutting machine has less scum.The plasma cutting machine uses a high temperature to melt the metal and blow the molten metal away from the cutting surface. The flame cutting is make oxygen and steel chemical reaction to cut.The cutting process is different. So plasma cutting machine produces less scum.
3.Plasma cutting machine has less heat affected area. The heat affected area affect the cutting quality. High temperature will change the chemical structure of the metal.So flame cutting machine has a big heat affected area. If you do not get rid of the edge of the heat, the workpiece may not be suitable for secondary welding processing.
4.CNC plasma cutting machine has a higher productivity. CNC plasma cutting machine perforate speed can be 8.5 times than flame cutting machine.
5.Table plasma cutting machine is easy to use.For users who use flame cutting, it takes time to learn and practice the design of flame chemical parameters and maintain the chemical nature of the flame.If you are using a machine with a CNC or automatic gas console, all parameters are shipped at the factory. There is no need to manually adjust the gas. There is no need to keep any distance (a key element of good flame cutting). And it is easier to cut in accordance with templates and patterns, especially with templates and patterns. No need to adjust the gas, drag cutting ability and easy to use control device, making the plasma system easier to learn.
6.Cnc plasma cutting machine has higher flexibility.The plasma cutting system can cut any conductive metal, including stainless steel, aluminum, copper and brass. In contrast, the flame cutting machine is the use of oxygen and low carbon steel in the chemical reaction between the cutting, which can only be used to cut low (carbon) steel.
7.CNC plasma cutting machine has greater security.The fuel used for flame cutting is a mixture of oxygen and gas. The most commonly used fuel gases are acetylene, propane, MAPP, propylene and natural gas. One of the most commonly used is acetylene, because compared to other gases, acetylene produced a higher flame temperature, perforation faster. However, acetylene is unstable and highly flammable gas, too high pressure, temperature and even static are extremely sensitive. Acetylene explosions can cause tens of thousands of dollars in property damage and cause serious harm to nearby personnel.Some plasma cutitng machines are usually operated by compressed air and do not require the use of flammable gases.
SteelTailor B5II table plasma cutting machine is an plasma cutting and marking machine. https://www.steeltailor.com/flame-plasma-cutting/cnc-plasma-cutting-table-detail.html
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/
没有评论:
发表评论