How to make maintenance of table plasma cutting machine cutting torch?

This article is from SteelTailor blog:https://www.steeltailor.com/blog/make-maintenance-table-plasma-cutting-machine-cutting-torch/

What decide the cutting quality of table plasma cutting machine? One of the most important reason is cutting torch. How to make maintenance of plasma cutting machine cutting torch?

• The cutting current of table plasma cutting machine should not larger than the rated current, or it will damage the cutting torch.
• When we replace CNC cutting machine electrode and nozzle,we should cut off the power supply at first. After installed the electrode and nozzle, then we can install the torch switch.
• When table plasma cutting machine cutting, the electrode and nozzle should not be loosened.Every time before CNC cutting machine cutting, we should check if the electrode and nozzle is loosened.
• If table plasma cutting machine HF wire is burning 2.5–3mm, it should be replaced.When replacing , the electrode must be completely cooling.
• CNC plasma cutting machine compressed air must be dry and clean.Because the water vapor and oil pollution are easy to conduct electricity.

SteelTailor SmartIII table plasma cutting machine is an portable CNC plasma cutting machine.https://www.steeltailor.com/portable-cnc-cutting-machine/smartiii-portable-table-cnc-cutting-machine-detail.html

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/