Which gas is fit for your table plasma cutting machine?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/gas-fit-table-plasma-cutting-machine/

Table plasma cutting machine can cut different metals. Plasma cutting machine need different gas to cut different materials.

1.Table plasma cutting machine match with argon gas.Argon don’t react with any metal at high temperatures. Argon plasma arc is very stable. Moreover, table plasma cutting machine nozzle and electrode used have higher service life.Argon plasma arc valtage is low, the cutting ability is limited. Compared with air cutting, its cutting thickness will be reduced by about 25%.In addition,argon plasma arc will make a lot of slags.

2.CNC plasma cutting machine match with oxygen. Oxygen can improve the cutting speed when cutting low carbon steel. When plasma cutting machine stop cutting, it is alike with flame cutting.Oxygen plasma arc make plasma cutting machine cutting speed is faster in high temperatures.CNC cutting machine electrode will be damaged easily. So we need oxidation electrode to prolong electrode life.

3.Plasma cutting machine match with hydrogen.Hydrogen is often used as an auxiliary gas mixed with other gases.Such as the H35 (gas volume fraction of hydrogen is 35%, the other is argon) is one of common gas.The plasma arc cutting ability is the strongest.Metal of more than 70mm thickness, we often use argon + hydrogen as plasma cutting machine cutting gas.

4.CNC cutting machine match with nitrogen. Nitrogen is used as a working gas.Nitrogen plasma arc stability is good and the jet power is higher than argon.So the slag is less than argon. Nitrogen can be used alone and can also be mixed with other gas.Nitrogen is sometimes used as an arc gas for cutting oxygen plasma arc

SteelTailor LegendB5II table plasma cutting machine is an powerful CNC plasma cutting and marking machine.

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

Edit

Why table plasma cutting machine cutting have slags?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/table-plasma-cutting-machine-cutting-slags/

Table plasma cutting machine cutting sample is smooth and have no slags in good condition. If plasma cutting machine cutting oxygen pressure or cutting nozzle fittings discomfort , it will have slags.

1. Table plasma cutting machine slag in the lower edge.Reason:A.Plasma cutting machine cutting speed is too fast or too low.The nozzle is small. CNC cutting machine cutting oxygen pressure is too low.B. The surface of steel is not clean or oxide corrosion.C. The nozzle is too high from the cutting steel.
2. CNC plasma cutting machine slag is produced on the cutting section. The reason is alloy content is too high.

SteelTailor table plasma cutting machine is economical CNC plasma cutting machine.

Yeah!LegendB5II CNC table plasma cutting and marking machine

What’s the danger when table plasma cutting machine cutting?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/whats-danger-table-plasma-cutting-machine-cutting/

Table plasma cutting machine is dangerous if operating improperly.What’s the danger when table plasma cutting machine cutting?

1. Keep away when table plasma cutting machine cutting. When plasma cutting machine cutting, all the person should stand far away. The mars splashed out from the cutting head will hurts people badly
2. Operator should ware work clothes when operating CNC plasma cutting machines.Clothes with metal or wires are not allowed. CNC cutting machine is working in high pressure electric.It is dangerous if you touch the wires.
3. Table plasma cutting machine must be installed in accordance with the manufacturer’s procedures and requirements for an electric shock can kill people.
4. When CNC plasma cutting machine power is switched on, the wires and cables cannot be touched.
5. Plasma cutting machine should and can only be operated by trained operators.

SteelTailor B5II table plasma cutting machine is an powerful  CNC plasma cutting and marking machine.

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

How to improve table plasma cutting machine cutting efficiency ?

table plasma cutting machine
This article is from SteelTailor blog:https://www.steeltailor.com/blog/improve-table-plasma-cutting-machine-cutting-efficiency/
How to improve table plasma cutting machine cutting efficiency ?

1. When table plasma cutting machine cutting speed improved properly, the cutting quality will be better. The incision is slightly narrow and the surface is more smooth.
2. When CNC plasma cutting machine cutting speed is very fast, the cutting quality will be reduced.It will cause larger drag.
3. When plasma cutting machine cutting speed is too low, the incision will be bigger. The slag is not easy to clean.

So table plasma cutting machine cutting efficiency is related to the cutting speed.
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

How to protect table plasma cutting machine cutting torch?

table plasma cutting machine
This article is from SteelTailor blog:https://www.steeltailor.com/blog/protect-table-plasma-cutting-machine-cutting-torch/
The principle of table plasma cutting machine cutting torch and carbon dioxide gas welding torch are the same.The only difference is that plasma cutting machine cutting torch has a pure oxygen flow jet tube and a door. Many customer said cutting torch is damaged easily. How to protect table plasma cutting machine cutting torch?

1. Assembly table plasma cutting machine cutting torch in a right way. Plasma cutting machine cutting torch installation process should be properly.All the parts should be keep clean.
2. CNC plasma cutting machine consumables should be changed before completely damaged. Bad electrode, nozzle and eddy current ring will produce uncontrollable Plasma arc.This will damage plasma cutting machine cutting torch easily. So bad consumables should be changed in the first time.
3. CNC cutting machine torch connection thread should be cleaned daily.
4. Plasma cutting machine electrode and nozzle should be cleaned.If electrode and nozzle are dirty, plasma cutting machine torch can’t work properly.
5. Check table plasma cutting machine gas and cooling gas every day.If the flow is not sufficient or leak, should stop and troubleshooting immediately .

SteelTailor table plasma cutting machines are economical and powerful!
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

What’s the correctly way to use table plasma cutting machine?–First

table plasma cutting machine
This article is from SteelTailor blog:https://www.steeltailor.com/blog/whats-correctly-way-use-table-plasma-cutting-machine-first/
Table plasma cutting machine is an important CNC cutting machine in metal industry.What’s the correctly way to use table plasma cutting machine?

1. Table plasma cutting machine need correct pressure and flow of plasma. It is very important to the service life of consumables.If plasma cutting machine pressure is too high, the electrode life will be greatly reduced; the pressure is too low, the nozzle life will be affected.
2. CNC plasma cutting machine need reasonable cutting distance. CNC cutting machine cutting distance means the nozzle to the workpice surface.When plasma cutting machine need to perforation, the distance need to be 2 times of normal distance.
3. The perforation thickness should be within the allowable range of plasma cutting machine.Plasma cutting machine can not cut thickness over permission thickness. The usual perforation thickness for the normal cutting thickness of 1/2
4. Table plasma cutting machine don’t overload the nozzle.If plasma cutting machine nozzle is overloaded, the nozzle will soon be damaged.
5. CNC plasma cutting machine keep plasma gas dry and clean. CNC cutting machine need dry and clean plasma gas to function properly.Problems of  gas compression systems usually make dirty plasma gas.It shorten the service life of consumable and cause abnormal damage. Method for testing gas quality is set the Torch in testing.Then put a mirror on the bottom. If there is water and mist on the mirror, you need to identify the cause and correct.

SteelTailor table plasma cutting machines are economical and powerful!
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

Which do you choose,table plasma cutting machine or CNC laser cutting machine?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/choosetable-plasma-cutting-machine-cnc-laser-cutting-machine/
Table plasma cutting machine and laser cutting machine is widely used in cars, locomotives, ships, pressure vessel, chemical machinery, nuclear industry, general machinery, engineering machinery, steel, textile, oil and other industries.
Table plasma cutting machine has a wide cutting range. Plasma cutting machine can cut all metal plates and many non-metallic materials. CNC plasma cutting machine the cutting thickness can be 50mm.plasma cutting machine cutting speed is very fast. The cutting surface is smooth,small thermal deformation.It has no heat affected area. Table plasma cutting machine cutting gas has big affect in the cutting quality .Argon, hydrogen, nitrogen, oxygen, air, water vapor, and some mixed gases are the most common plasma cutting machine gas.
CNC laser cutting machine is widely used in electrical cabinets, switches, elevators, structural components, landing lift panels, machine tools and food machinery housing, textile machinery parts, construction machinery components, large motors, silicon steel sheet.
Laser cutting machine can also be used for decoration, advertising, service industries, such as stainless steel (average thickness 3mm) or non metal materials (average thickness 20mm) pattern, logo, font etc.
CNC laser cutting machine can cut plastic (polymer), rubber, wood, paper products, leather and natural fabric and decomposition of inorganic materials; at the same time also can cut quartz, ceramics and other inorganic materials, can cut the new lightweight fiber reinforced polymer composite materials.
Laser cutting machine can cut three-dimensional surface workpiece. such as car covers, doors, trunk and so on.
SteelTailor Legend B5II table plasma cutting machine is an power plasma  cutting and marking machine.

Yeah!LegendB5II CNC table plasma cutting and marking machine

What damage table plasma cutting machine cutting torches?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/damage-table-plasma-cutting-machine-cutting-torches/
Table plasma cutting machine cutting torches can be damaged easily. Why? CNC cutting machine cutting torch is very important. It decides the cutting quality.

1. Table plasma cutting machine cutting torch is crashed.
2. Plasma cutting torch is damaged by bad plasma arc.
3. The CNC plasma cutting machine bad plasma arc can be caused by bad consumables.So we should often check plasma cutter consumables.
4. CNC cutting machine bad plasma arc can be caused by dirty on the cutting torch. Keep clean on the torches is necessary.
5. Table plasma cutting machine bad plasma arc is caused by loose parts on the cutting torch. Before cutting ,we should check all CNC cutting machine parts at first.

SteelTailor table plasma cutting machine 
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/