What’s the correctly way to use table plasma cutting machine?–First

table plasma cutting machine
This article is from SteelTailor blog:https://www.steeltailor.com/blog/whats-correctly-way-use-table-plasma-cutting-machine-first/
Table plasma cutting machine is an important CNC cutting machine in metal industry.What’s the correctly way to use table plasma cutting machine?

1. Table plasma cutting machine need correct pressure and flow of plasma. It is very important to the service life of consumables.If plasma cutting machine pressure is too high, the electrode life will be greatly reduced; the pressure is too low, the nozzle life will be affected.
2. CNC plasma cutting machine need reasonable cutting distance. CNC cutting machine cutting distance means the nozzle to the workpice surface.When plasma cutting machine need to perforation, the distance need to be 2 times of normal distance.
3. The perforation thickness should be within the allowable range of plasma cutting machine.Plasma cutting machine can not cut thickness over permission thickness. The usual perforation thickness for the normal cutting thickness of 1/2
4. Table plasma cutting machine don’t overload the nozzle.If plasma cutting machine nozzle is overloaded, the nozzle will soon be damaged.
5. CNC plasma cutting machine keep plasma gas dry and clean. CNC cutting machine need dry and clean plasma gas to function properly.Problems of  gas compression systems usually make dirty plasma gas.It shorten the service life of consumable and cause abnormal damage. Method for testing gas quality is set the Torch in testing.Then put a mirror on the bottom. If there is water and mist on the mirror, you need to identify the cause and correct.

SteelTailor table plasma cutting machines are economical and powerful!
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/