How to reduce the cost of CNC plasma cutting machine?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/reduce-cost-cnc-plasma-cutting-machine/

Some customer said the cost of CNC plasma cutting machine is expensive.How to reduce the cost of CNC table plasma cutting machine?

1. CNC plasma cutting machine need reasonable cutting height. The height means table plasma cutting machine cutting nozzle between the cutting material. It should be set according to the instructions.
2. CNC table plasma cutting machine need proper pressure and flow of plasma.Correct air pressure and flow are very important to the service life of consumables.If the pressure is too high, the electrode life will be greatly reduced; the pressure is too low, the nozzle life will be affected.
3. CNC plasma cutting machine nozzle should not overloaded use.If plasma cutting machine nozzle is overloaded, it will soon be damaged.The current intensity shall be 95% of the operating current of the nozzle.For example: the nozzle of 100A shall be set to 95A.
4. The cutting thickness should be within the allowable range of table plasma cutting machine system.
5. Keep plasma cutting machine plasma gas dry and clean.CNC plasma cutting machine need dry and clean plasma gas to work properly.Dirty gas will reduce the service life of consumables.The best way to test the gas is put a mirror on the bottom,if there is water and mist on the mirror, you need to identify the cause and correct.
6. CNC cutting machine cutting should begin from the edge.
7. Reduce CNC plasma cutting machine unnecessary “arc”(0r arc)time.The  nozzle and electrode consumption are very fast when arc begin.
8. Avoid plasma cutting machine plasma arc elongated expansion. plasma arc elongated expansion will damage cnc cutting machine nozzle.
9. After replaced CNC plasma cutting machine consumables, the gas should be removed.When plasma cutting machine stop working for a long time or change the consumables.The gas should be removed (2-3 minutes is appropriate) to protect water and mist from the separatist system.
10. Remove table plasma cutting machine cutting slags. Clean the slags on the torch frequently, otherwise will cause destructive plasma arc.
11. Keep CNC plasma cutting machine torch and consumables clean.Any dirty on plasma cutting machine torch and consumables will affect plasma cutting system.

SteelTailor LegendB5II CNC plasma cutting machine is an economical table plasma cutting machine with marking function.

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/