What’s the notes when operating CNC tube cutting machine –TubeTailorII

SteelTailor TubeTailorII CNC tube cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-notes-when-operating-cnc-tube-cutting-machine-tubetailorii/

There are 9 notes which we should pay attention to when operating CNC tube cutting machine.

1. The dedusting devices on CNC tube cutting machine shall be in good condition before cutting.
2. If you need to change the speed of spindle ,tube cutting machine must be stopped at first. The gears must be meshed completely when transmission.When you find anything unnormal you must stop CNC tube cutting machine at once to check it.
3. When long tube be put into the rack, you should take notice to prevent the tube roll,impact,crushing people.
4. When the tube cutting machine is working, anyone can’t touch the CNC tube cutting machine.When operating ,the cuff should be tied completely. Wearing gloves is strictly prohibited. Human head should depart from the cutting direction.
5. When using a grinding whell tube cutting machine, the prior thing to do is to check if the grinding is good, if the power cable is good.
6. When the tube cutting machine cutting tubes, people should keep away from it to prevent the Slag Crusher flow out and heart people.
7. The cutter should be adjust well before tube cutting machine working. Tubes should be clamped correctly. Length of the clamping position may not be less than 50 mm. Parking bezel is fixed, after clamping, loosen, such as forward, backward after the sequential test, work can be carried out
8. People should not stand at the direction of the tubes when cutting.
9. The tube cutting machine must stop working when Replacement of measurement artifacts, tools, lubrication, cleaning tube head.

In addition, you should learn how to operate the tube cutting machine carefully.

SteelTailot TubeTailorII is an simple and efficient CNC tube cutting machine.It is an portable tube cutting machine.

Related article: