How to deal with table plasma cutting machine common issues?
| Serial number | issues | Reason | how to deal with? |
| 1 | Open table plasma cutting machine power switch,The power indicator is not on? | Plasma cutting machine power supply switch is broken | Replace |
| CNC cutting machine power box fuse broken | Replace | ||
| CNC plasma cutting machine control transformer is bad | Replace | ||
| CNC cutting machine power switch is badReplace | Replace | ||
| The indicator is bad. | Replace | ||
| 2 | Can’t pre adjust table plasma cutting machine cutting gas pressure. | Gas source can’t be connected | Open switch and connect gas |
| CNC cutting machine pressure valve is bad. | Replace | ||
| Plasma cutting machine solenoid valve wiring is bad | Replace | ||
| 3 | When press CNC cutting machine button,there is no gas coming out | CNC plasma cutting machine pipeline leaks. | Repair |
| The solenoid valve is bad. | Replace. | ||
| 4 | After pressing plasma cutting machine conductive nozzle.The torch button indicator is light but no arc cutting | KT1 bad. | Replace |
| CNC cutting machine high frequency transformer is bad | Replace | ||
| Short circuit of high frequency capacitor C7 | Replace | ||
| CNC cutting machine torch cable is in poor contact or break | Repair | ||
https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/
没有评论:
发表评论