How steel plate correction work in a CNC cutting machine?

This article is from SteelTailor :https://www.steeltailor.com/faq/172-how-steel-plate-correction-work-in-a-cnc-cutting-machine.html

Q:How steel plate correction work in a CNC cutting machine? 

A:Operation of steel plate correction

Take the SteelTailor plasma CNC cutting machine  as an example to demonstrate how to implement the steel plate correction.

1. After the cutting graph code is input into the numerical control system, if the system still does not operate, press [F4] (adjust) to enter the adjustment interface, and press [F3] (correction) to display the system prompt as shown in

Fig.1 Steel plate correction and input angleIn the interface, after [X] is pressed, the system will adjust the steel plate.

Fig.2 Steel plate correction

1) Location of the offset start point: manually move the torch of CNC cutting machine to the edge of either side or a corner of steel plate. After the cutting tip is aligned, press [X] to set the current point as the start point.

2) Location of the offset end point: Select the long side of steel plate where possible and move the cutting tip manually along this side. When the tip is moved again to the edge of this side, press [Y] to set the current point as the end point. (two points shall be far apart from each other and on the edge of steel plate)

3) Control system will automatically calculate the current offset angle of steel plate, and then automatically rotate and correct the graph.

4) After the completion of correction, the system prompts whether to return to the start point. If you press [ENTER], the system will return to the start point. If you press [ESC], the system will exit the correction and return to the graphical interface.

Fig.3 Return to the start point

In the interface, after [Y] is pressed, system will rotate the angle.

Fig.3.12 Rotate the angle

At this point, you can manually enter the angle, and press [Enter]. If the input angle is from -3600 to +3600, system will automatically rotate the graph according to the input angle.

Fig.4 Input the angle

1. In this interface, press [Restore] to recover to the original graph.

Fig.5 Rotated angle

Steel plate correction and graph rotation

The steel plate correction of CNC cutting machine is actually based on the controller's graphical rotation function. So it may also be used for rotation of any angle according to the basically same operation. 

SteelTailor CNC Cutting Manufacturer Paid Promotion to Help Dealers Clear Inventory

SteelTailor CNC cutting machine manufacturer Paid Promotion to Help Dealers Clear Inventory

This article is from SteelTailor blog:https://www.steeltailor.com/news/company-news/193-SteelTailor-CNC-cutting-machine-manufacturer-Paid-Promotion-to-Help-Dealers-Clear-Inventory.html#.WQKxLVV96Uk

Starting from May 2017, SteelTailor will carry out a web promotion on Google ADwords, YouTube, FaceBook, Yandex, Alibaba, Directindustry and other platforms free of charge for excellent dealers to help them promote the inventory of CNC cutting machine products. The quota is limited, so those who come earlier will get the free service.

This paid promotion will focus on the advantages of steelTailor’s digital marketing force for the dealer to do localization promotion. If you are regional exclusive agents, you will be able to access the terminal customer inquiries directly.

The promotion will basically cover the mainstream CNC industry promotion network. The scale will be identical with SteelTailor release of new products. We will increase the introduction of pictures, videos of the POWER II portable CNC cutting machine, LEGEND B5II table plasma cutting machine, G3 flame and plasma gantry cutting machine and other old products, hoping that customers will have the opportunity to understand these classic CNC cutting machines.

Please pay attention to us for more information on marketing activities. SteelTailor has been insisting on the dealer strategy for many years, and we will always be responsible for the products and distributors. SteelTailor, the friend!

https://www.steeltailor.com/news/company-news/193-SteelTailor-CNC-cutting-machine-manufacturer-Paid-Promotion-to-Help-Dealers-Clear-Inventory.html

How high definition cnc plasma cutting machine cutting hole in high quality?

Legend HD PLus CNC plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/high-definition-cnc-plasma-cutting-machine-cutting-hole-high-quality/

High definition cnc plasma cutting machine fine hole cutting generally refers to cut 5--30mm low-carbon steel. Cutting aperture and plate thickness is 1: 1 and cut in high-quality round hole. One cutting molding, no follow-up processing.This technology is mainly used in the cutting of high-quality bolt holes in the workpiece.Improve the production efficiency and reduce the staff, equipment investment.

Following is 5 points to achieve the main conditions high quality hole cutting:

• CNC plasma cutting machine manufacturer provide high cutting precision and high stability.
• The plasma cutter of Plasma cutting machine must be in high definition.
• CNC cutting machine CNC system must have the function of cut off and open the arc voltage when cutting small holes.
• CNC plasma cutting machine THC. THC can set the cutting height accurately and automatic.
• CNC plasma cutting machine nesting software. It must with small hole cutting process.

Yeah!Legend HD Plus plasma cutting machine is an high definition cnc plasma cutting machine with high cutting quality. More detailed information,pls visit:https://www.steeltailor.com/flame-plasma-cutting/yeah-legend-hd-plus-plasma-cutting-machine-detail.html

Why CNC plasma cutting machine can’t cut through the metal?

PowerII portable CNC cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/cnc-plasma-cutting-machine-cant-cut-metal/

CNC plasma cutting machine can’t cut through the metal sometimes. Why?There are two reasons:

• The plasma power source. We should check cnc cutting machine cutting current is appropriate.If the plate is too thick,plasma cutting machine cutting current is too small. CNC plasma cutting machine will can’t cut through the metal. We should set high cutting current until the plate can be cut through.
• When the plasma power used for a long time. CNC plasma cutting machine can’t cut through metal even if we set in high current. In this way, we should change a new plasma cutter .

SteelTailor portable CNC cutting machines are all in high quality. 9000 sets working all over the world.

More detailed information ,pls visit:https://www.steeltailor.com/products.html

How to avoid cnc plasma cutting machine cutting defects?--1

PowerII portable CNC cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/avoid-cnc-plasma-cutting-machine-cutting-defects-1/

How to avoid cnc plasma cutting machine cutting defects?

• CNC plasma cutting machine cutting along the fillet.  Which is caused by the plasma arc heat of the top surface of the incision.Reasonable control of the height of the torch can minimize or eliminate the rounded corners.Serious upper fillet phenomenon usually indicates that the cutting torch cutting height needs to be reduced.
• CNC cutting machine the upper edge of the slag.The upper edge of the slag is caused by the rapid cutting or the height of the torch is too high.Decreasing the cutting speed or reducing the cutting height of the torch can reduces the upper edge of the slag.
• CNC plasma cutting machine the bottom of cutting sample is slag. The molten metal may accumulate at the bottom of the plate. The faster the cutting speed, the less the amount of material melted, and the less the amount of slag at the bottom.

SteelTailor CNC plasma cutting machine are in high quality. More detailed information ,pls visit:https://www.steeltailor.com/products.html

How to make maintenance of portable CNC cutting machine?

PowerII portable CNC cutting machine

This article is from SteelTailor blog: https://www.steeltailor.com/blog/index.php/2017/04/10/make-maintenance-portable-cnc-cutting-machine/

More and more people like portable CNC cutting machine. How to make maintenance?

1.We should clean up the dirty on portable CNC cutting machine and the rail. Cut off the power when portable CNC cutting machine stop working. Make the CNC cutting machine tool belt is empty without any gas

2.We should check portable CNC cutting machine vertical guide rack surface have enough  lubricating oil.

3.If you leave portable CNC cutting machine for a long time, pls remember cut off the power.

4.We should check the rail if it is in good working condition every week.

4.Check if there is any waste in the CNC cutting machine gas belt.Check if all the valves and pressure gauges working in good condition.

SteelTailor portable CNC cutting machine is in high quality and economical.More detailed  information,pls visit: https://www.steeltailor.com/portable-cnc-cutting-machine/portable-cutting-machine-1-detail.html

https://www.steeltailor.com/blog/index.php/2013/06/13/steeltailor-powerii-plasma-cutting-equipment-match-with-powermax105-perfectly/

Waht’s the advantages of portable CNC cutting machine ?

PowerII portable CNC cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/index.php/2017/04/06/wahts-advantages-portable-cnc-cutting-machine/

Portable CNC cutting machine is a CNC cutting machine which can be moved from place to place by two person, be carried to any where you need by car easily.What’s the advantages of portable CNC cutting machine?

• Portable CNC cutting machine is very light and portable. It can be moved from place to place by two person, carried from any where you need by car easily.
• Portable CNC cutting machine is very economical.The cost of portable CNC cutting machine is half less than traditional heavy CNC cutting machine.Although large-scale CNC cutting machine is powerful, but the cost and operating costs are high.Portable CNC cutting machine can cut steel, stainless steel and aluminum, etc.
• Portable CNC cutting machine cutting ability is the same as traditional heavy gantry cutting machine.The cutting accuracy can be 0.2mm. The cutting sample surface is smooth.

SteelTailor is the world leader of portable CNC cutting machine.Steeltailor PowerII is one of the best seller. More detailed information ,pls visit：https://www.steeltailor.com/portable-cnc-cutting-machine/portable-cutting-machine-1-detail.html