How steel plate correction work in a CNC cutting machine?

This article is from SteelTailor :https://www.steeltailor.com/faq/172-how-steel-plate-correction-work-in-a-cnc-cutting-machine.html

Q:How steel plate correction work in a CNC cutting machine? 

A:Operation of steel plate correction

Take the SteelTailor plasma CNC cutting machine  as an example to demonstrate how to implement the steel plate correction.

1. After the cutting graph code is input into the numerical control system, if the system still does not operate, press [F4] (adjust) to enter the adjustment interface, and press [F3] (correction) to display the system prompt as shown in

Fig.1 Steel plate correction and input angleIn the interface, after [X] is pressed, the system will adjust the steel plate.

Fig.2 Steel plate correction

1) Location of the offset start point: manually move the torch of CNC cutting machine to the edge of either side or a corner of steel plate. After the cutting tip is aligned, press [X] to set the current point as the start point.

2) Location of the offset end point: Select the long side of steel plate where possible and move the cutting tip manually along this side. When the tip is moved again to the edge of this side, press [Y] to set the current point as the end point. (two points shall be far apart from each other and on the edge of steel plate)

3) Control system will automatically calculate the current offset angle of steel plate, and then automatically rotate and correct the graph.

4) After the completion of correction, the system prompts whether to return to the start point. If you press [ENTER], the system will return to the start point. If you press [ESC], the system will exit the correction and return to the graphical interface.

Fig.3 Return to the start point

In the interface, after [Y] is pressed, system will rotate the angle.

Fig.3.12 Rotate the angle

At this point, you can manually enter the angle, and press [Enter]. If the input angle is from -3600 to +3600, system will automatically rotate the graph according to the input angle.

Fig.4 Input the angle

1. In this interface, press [Restore] to recover to the original graph.

Fig.5 Rotated angle

Steel plate correction and graph rotation

The steel plate correction of CNC cutting machine is actually based on the controller's graphical rotation function. So it may also be used for rotation of any angle according to the basically same operation. 

How to avoid cnc plasma cutting machine cutting defects?--1

PowerII portable CNC cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/avoid-cnc-plasma-cutting-machine-cutting-defects-1/

How to avoid cnc plasma cutting machine cutting defects?

• CNC plasma cutting machine cutting along the fillet.  Which is caused by the plasma arc heat of the top surface of the incision.Reasonable control of the height of the torch can minimize or eliminate the rounded corners.Serious upper fillet phenomenon usually indicates that the cutting torch cutting height needs to be reduced.
• CNC cutting machine the upper edge of the slag.The upper edge of the slag is caused by the rapid cutting or the height of the torch is too high.Decreasing the cutting speed or reducing the cutting height of the torch can reduces the upper edge of the slag.
• CNC plasma cutting machine the bottom of cutting sample is slag. The molten metal may accumulate at the bottom of the plate. The faster the cutting speed, the less the amount of material melted, and the less the amount of slag at the bottom.

SteelTailor CNC plasma cutting machine are in high quality. More detailed information ,pls visit:https://www.steeltailor.com/products.html

How to make maintenance of portable CNC cutting machine?

PowerII portable CNC cutting machine

This article is from SteelTailor blog: https://www.steeltailor.com/blog/index.php/2017/04/10/make-maintenance-portable-cnc-cutting-machine/

More and more people like portable CNC cutting machine. How to make maintenance?

1.We should clean up the dirty on portable CNC cutting machine and the rail. Cut off the power when portable CNC cutting machine stop working. Make the CNC cutting machine tool belt is empty without any gas

2.We should check portable CNC cutting machine vertical guide rack surface have enough  lubricating oil.

3.If you leave portable CNC cutting machine for a long time, pls remember cut off the power.

4.We should check the rail if it is in good working condition every week.

4.Check if there is any waste in the CNC cutting machine gas belt.Check if all the valves and pressure gauges working in good condition.

SteelTailor portable CNC cutting machine is in high quality and economical.More detailed  information,pls visit: https://www.steeltailor.com/portable-cnc-cutting-machine/portable-cutting-machine-1-detail.html

https://www.steeltailor.com/blog/index.php/2013/06/13/steeltailor-powerii-plasma-cutting-equipment-match-with-powermax105-perfectly/