How CNC laser cutting machine used in elevator manufacturing?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-cnc-laser-cutting-machine-used-in-elevator-manufacturing/

CNC laser cutting machine is one of the best elevator makers. More and more elevators used in buildings. How to make elevator fast ? CNC laser cutting machine can do it for you!

We all know that elevator is made of about 3mm stainless steel. CNC laser cutting machine has its advantages.

1. CNC laser cutting machine working in high efficiency , the cutting quality is very high. Laser cutting machine cutting speed is very high. The cutting plate don’t need to process and can be used directly.
2. CNC laser cutting machine cutting automatic. Laser cutting machine can cut stainless steel easily. Fiber laser cutting machine save time and money for us.
3. With CNC laser cutting machine, we can make flexible manufacturing. The cost is low.

IDMLASER CLAYA V fiber laser cutting machine is an economical CNC laser cutting machine.More detailed information ,pls visit:http://www.steeltailor.com/products/laser_cutting_and_engraving_machine/laser-cutting-marking-machine/clayav-fiber-laser-cutting-machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

How to make table plasma cutting machine cutting nozzle long life?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-make-table-plasma-cutting-machine-cutting-nozzle-long-life/

How to make table plasma cutting machine cutting nozzle not easy bad? This is an common question.

1.Table plasma cutting machine cut holes as little as possible. Cutting holes will hurt plasma cutting machine cutting nozzles badly.

2.The metal thickness should not beyond table plasma cutting machine max cutting thickness. Normally ,we should cutting metals thickness in 60% max thickness.

3.plasma cutting machine cutting nozzles should keep a distance from the metal. Normally it is 3-8mm.

Table plasma cutting machine cutting nozzle is also affected by other reasons. Such as , quality of input voltage, electrode, plasma cutting machine quality, plasma cutting gun quality, user experience and so on.

Yeah!Legend B5II is an powerful table plasma cutting machine. It can both cutting and marking metals. More detailed information ,pls visit:http://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

http://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

What’s the three cutting methods of CNC laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-three-cutting-methods-of-cnc-laser-cutting-machine/

There are three cutting methods of CNC laser cutting machine.

1. CNC laser cutting machine melt cutting method

In laser cutting machine melting cutting method. The workpiece is partially melted. Then the molten material is flowed by the air flow. This process is called CNC laser melting cutting method.

The material is melted by the laser beam. Then the melted material is flowed away by the high purity inert gas. The gas doesn’t participate in cutting.

2. CNC laser cutting machine vaporization cutting.

In CNC laser cutting machine vaporization cutting , the material surface temperature rose to the boiling temperature is fast enough to avoid melting. So part of the material is vaporized into steam disappeared . Part of the material flowed away by the auxiliary gas. The power of vaporization laser cutting machine must be very big.

3. CNC laser cutting machine oxide melt cutting (laser flame cutting)method

In melting cutting, CNC laser cutting machine using inert gas. If we use oxygen or other active gas, the material is lighted by oxygen and laser beam. The material is cutting by laser beam and oxygen or other active gas. It is called laser cutting machine oxidation melting cutting.

Due to this effect, for the same thickness of steel, oxidation melting cutting effect is lower than melting cutting. CNC laser flame cutting will generate a wider kerf and obvious roughness. The heat affected zone increased and more poor edge quality.

IDMLASER CLAYA V is an economical fiber laser cutting machine.More detailed information ,pls visit:http://www.steeltailor.com/products/laser_cutting_and_engraving_machine/laser-cutting-marking-machine/clayav-fiber-laser-cutting-machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

What’s the attention when operating table plasma cutting machine?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-attention-when-operating-table-plasma-cutting-machine/

More and more table plasma cutting machine used in industry. So we should pay attention to the operation.What’s the attention when operating table plasma cutting machine?

1. When meet some emergency things, operator should press the red emergency stop switch to stop table plasma cutting machine working at once.
2. When operators make maintenance of CNC table plasma cutting machine, he should pay attention to the coordination of technical staff.
3. Before shutdown plasma cutting machine, operators should close all the valves and put the remaining gas in the air
4. If there is tempering in table plasma cutting machine pipeline, operator should cut off power immediately.
5. Before start plasma cutting machine, operator should check if the pipeline is in leakage.
6. After CNC cutting machine start working, operator should check if there is obstacles in the rail.
7. Operator should not leave table plasma cutting machine when working. non operator shall not arbitrarily start the machine.

LegendB5II is an powerful table plasma cutting machine.It can both cutting thick and thin sheet metals and marking plates. More detailed information , pls visit:http://www.steeltailor.com/products/plasma-oxyfule-cutting/sheet_matel_plasma_cutting_machine/legendb5ii-table-cnc-plasma-cutting-machine.html

http://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

How to reduce CNC laser cutting machine radiation to human body?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-reduce-cnc-laser-cutting-machine-radiation-to-human-body/

How to reduce the radiation to human body when CNC laser cutting machine working?

1. We need protective equipment when CNC laser cutting machine working

We need to ware goggles to protect our eyes. According to the theory of protection, goggles can be divided into the reflection, absorption and diffraction type and compound type. We should choose goggles according to the laser wavelength of CNC laser cutting machine.

2. We need to eat more vegetables to protect ourselves from CNC laser cutting machine radiation

We can protect from laser cutting machine by ourselves. We operators should eat some carrots, bean sprouts, tomatoes, lean meat, animal liver which are rich in vitamins AC. Because these foods are able to help people to protect our eyes in a better way.

3. Operators should escape the laser beam when CNC laser cutting machine working

Operators should avoid laser cutting machine if you can. If the metals can be cut by CNC cutting machine and the cutting result is good. We suggest use CNC cutting machine and not laser cutting machine. Through CNC laser cutting machine cut in high quality. The radiation is also very big

IDMLASER CLAYA V-1325 is an economical fiber laser cutting machine,more detailed information ,pls visit:http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/