How CNC laser cutting machine cutting double-sided laminating sheets?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-cnc-laser-cutting-machine-cutting-double-sided-laminating-sheets/

It is difficult for CNC laser cutting machine to cut double-sided laminating sheets. Because the protective film on the sheets effect the cutting result. The protective film make CNC laser cutting machine cutting residue can’t drop easily. So the cutting effect is not good.

Before CNC laser cutting machine cutting double-sided laminating sheets. We should remove the protection film at the bottom. The protection film in the surface can’t effect the cutting. So only remove the protection film at the bottom is ok.

IDMLASER CLAYA V is an economical fiber laser cutting machine.More detailed information pls visit:

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

Introduction of table plasma cutting machine cutting process

This article is from SteelTailor blog:http://www.steeltailor.com/blog/introduction-of-table-plasma-cutting-machine-cutting-process/

Table plasma cutting machine is widely used in modern industry .Plasma cutting machine have different cutting process.

Control faults cutting process of table plasma cutting machine : cutting material by heated and high speed laser beam .Table plasma cutting machine is not fit for this kind of easy heat-damaged brittle materials. Laser beam heated in high temperature ,the brittle material will be cut easily.

Oxide melt cutting process of table plasma cutting machine: generally inert gases is fit for oxide melt cutting. When oxygen or other reactive gases is used in laser marking machine. Under laser beam , the oxygen burned and this called oxide melt cutting.

Yeah!LegendB5II is an powerful table plasma cutting machine. It can fit for both marking and cutting. B5II plasma cutting machine can cut as thin as 0.3mm and as thick as 22mm.

More detailed information,pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

What’s the difference of CNC laser cutting machine and plasma cutting machine?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-difference-of-cnc-laser-cutting-machine-and-plasma-cutting-machine/

CNC laser cutting machine and plasma cutting machine is widely used in metal cutting industry. What’s the difference of CNC laser cutting machine and plasma cutting machine?

1. The injury in CNC laser cutting machine and plasma cutting machine is different. Laser cutting machine doesn’t hurt metal. Plasma cutting machine will hurt metal more or less. If the plasma cutting machine cutting torch have some problem, the metal will be damaged.
2. The slit of CNC laser cutting machine and plasma cutting machine is different. The laser beam of laser cutting machine is very small. So the kerf of the cutting metal is very narrow. The plasma cutting machine kerf is lager than laser cutting machine.
3. The cutting speed of CNC laser cutting machine and plasma cutting machine is difference. Laser cutting machine cutting speed is faster than plasma cutting machine.
4. The precision of CNC laser cutting machine and table plasma cutting machine is also different. The precision of laser cutting machine is 0.05mm. Laser cutting machine precision is higher than plasma cutting machine

CLAYA V fiber laser cutting machine is an economical CNC laser cutting machine.More detailed information pls visit:http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

How often to clean table plasma cutting machine cutting torch?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-often-to-clean-table-plasma-cutting-machine-cutting-torch/

Table plasma cutting machine can cut all the metal in the world. CNC plasma cutting machine widely used in shipbuilding, pressure vessels and mechanical industry.

When table plasma cutting machine used for a long time, it will meet some problems such as no up arc, no ignition. These mainly caused by plasma cutting torched jammed. CNC table plasma cutting machine need to be cleaned after used for a long time. Some residue in the plasma cutting torch jammed channel. When anti-splashing of slag happened in cutting, we should stop cutting at once. Clean the cutting torch at once.

CNC table plasma cutting machine cutting torch is very important. We should clean CNC cutting machine cutting torch in time. So plasma cutting machine can work for a long time.

Yeah!LegendB5II table plasma cutting machine is an powerful CNC cutting machine. It can marking and cutting metal. The cutting thickness is from 0.3mm to 22mm.

More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

IDMLASER CLAYA V CNC laser cutting machine—best choice for sheet metal cutting

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/idmlaser-claya-v-cnc-laser-cutting-machine-best-choice-for-sheet-metal-cutting/

IDMLASER CLAYA V CNC laser cutting machine is an economical fiber laser cutting machine. The best choice for sheet metal cutting.

IDMLASER CLAYA V CNC laser cutting machine adopts SPI fiber laser generator, It has high conversion rate (>30%) from electrical power to light. It is very economical in power consumption and operation cost.Fiber laser generators only consume electrical power. There is no need for consumables, neither any gas.

IDMLASER CLAYA V fiber laser cutting machine with fiber laser generator. Fiber laser generator is semiconductor modular design. IDMLASER CLAYA V CNC laser cutting machine with less maintenance cost. No need of sophisticated mirrors. Wavelength of fiber laser is 1/10 of CO2;    Intelligent detecting & protecting; Simple and easy to integrate with robots.

More detailed information about IDMLASER CLAYA V CNC laser cutting machine,pls visit:http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

How to choose CNC laser cutting machine?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-choose-cnc-laser-cutting-machine/

CNC laser cutting machine is widely used in modern industry. How to choose CNC laser cutting machine?

1. CNC laser cutting machine brand is very important. Popular brand laser cutting machine manufacturer can promise fiber laser cutting machine technology support and after sale service is very good.
2. CNC laser cutting machine technology support is also very important. If you meet some problems when using laser cutting machine. Fiber laser cutting machine manufacturer can give you technology support to solve the problems.
3. Good CNC laser cutting machine after sale service can make solve all the problems you meet when using laser cutting machine.
4. CNC laser cutting machine price is not very important. Some customer choose cheap fiber laser cutting machine. But the product quality and technology support is not very good. When fiber laser cutting machine meet some problem. The company can’t help to solve it. It is very bad.

SteelTailor can give our customer high quality CNC laser cutting machine and give you good technology support and after sale service.

CLAYA V is an economical fiber laser cutting machine. More detailed information ,pls visit: http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

How often to make maintenance of table plasma cutting machine?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-often-to-make-maintenance-of-table-plasma-cutting-machine/

Table plasma cutting machine need to be made maintenance after used. How often we need to check it and make maintenance?

The voltage of CNC table plasma cutting machine drops after working for a period. There are several reasons.  When the temperature increased , poor connect make plasma cutting machine voltage dropped. When voltage dropped, table plasma cutting machine system will be off. This kind of fault is very easy  to discover. We should make maintenance in time.

When power supplies is in poor capacity or filter failure, it is very difficult to discover. It will make CNC table plasma cutting machine stop working suddenly .Make damage to us. So we need to make maintenance of CNC cutting machine in time.

SteelTailor LegendB5II is an powerful table plasma cutting machine. It can cut as thin as 0.3mm and as thick as 22mm. More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

How long does CNC laser cutting machine replaced the circulating water?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-long-does-cnc-laser-cutting-machine-replaced-the-circulating-water/

If your CNC laser cutting machine is using plain water cooling unit, we recommend that we change laser cutting machine circulating water every week.

The circulation water quality directly affects the life of CNC laser cutting machine. We recommend use purified water. Laser cutting machine circulation water temperature should be controlled under 35 centigrade .If the fiber laser cutting machine circulation water temperature is above 35 centigrade. We should change the circulation water or put ice in the water to lower the temperature.

If your CNC laser cutting machine need to work over 8 hours every day . We suggest using industry water cooling machine which can greatly increase the service life of laser cutting machine.

When operating fiber laser cutting machine, we need pay attention to these:1. Before laser cutting machine start working, the circulation water need to be full. 2. If you are using a water cooled machine, to ensure that the water cooling machine is full of water.

IDMLASER CLAYA V is an economical fiber laser cutting machine. More detailed information pls visit:

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/