How to control CNC table plasma cutting machine Current electricity?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-control-cnc-table-plasma-cutting-machine-current-electricity/

CNC table plasma cutting machine cutting in high quality. We should control the current electricity. The current electricity is an important effect when CNC plasma cutting machine cutting. It determines the cutting thickness and cutting speed.

When CNC table plasma cutting machine current increases, the arc diameter increased, so CNC cutting machine cutting ability increased. The plasma cutting machine cutting speed is also increased.

When table plasma cutting machine current increased, the arc diameter increased. So CNC cutting machine incision broadens. If plasma cutting machine current is too big, table plasma cutting machine cutting torch will be damaged easily. So the cutting quality will be bad.

So it is very important to control the right cutting current when using table plasma cutting machine.

SteelTailor LegendB5II is an powerful table plasma cutting machine.http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

CNC plasma cutting table Legend B5II plasma & platen cutting

How to make maintenance of CNC laser cutting machine?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-make-maintenance-of-cnc-laser-cutting-machine/

CNC laser cutting machine is widely used in modern industry. How to make maintenance of CNC laser cutting machine?

1. We should often check the CNC laser cutting machine strip. Make sure it is in tension. If there is problem, it will hurt people.
2. Ever six months, we should check the straightness of laser cutting machine rail and the verticality of CNC laser cutting machine. If there is un-normal, adjust it at once. If you don’t do this. Laser cutting machine cutting effect will not good. The cutting error will increases.
3. We should clean the dust and dirt in CNC fiber laser cutting machine every week.
4. We should often clean CNC laser cutting machine rail. Laser cutting machine rack should be oiled and clean. The rail should also be cleaned and oiled. So CNC fiber laser cutting machine will working in high efficiency .

IDMLASER CLAYA V-1325 is an economical CNC fiber laser cutting machine. More detailed information pls visit:

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

What’s the principle of CNC table plasma cutting machine?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-principle-of-cnc-table-plasma-cutting-machine/

CNC table plasma cutting machine working principle is CNC system combined with high temperature air ionization ejected through the nozzle. When electric current passes through, the gas become plasma arc with high temperature. The arc heat the metal to melt. The molten metal will be flow away by the high speed plasma .CNC table plasma cutting machine plasma arc is stable with plasma arc technology.

CNC table plasma cutting machine cutting shape is draw by the cutting software with a computer. With a plasma cutting table ,CNC table plasma cutting machine can cutting according to the shape.

Yeah!Legend B5II table plasma cutting machine is an economical plasma cutting machine. It can cut as thin as 0.3mm, as thick as 22mm.More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

How to solve CNC laser cutting machine common problems?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-solve-cnc-laser-cutting-machine-common-problems/

There are a lot of problems when we use CNC laser cutting machine. How to solve it?

1. The cutting effect of CNC laser cutting machine is not good. Or the metal can’t be cut through?

Pls check if the power of CNC laser cutting machine is too low. Check if the lens is dirty.If the focusing lenses is installed backwards. The water temperature is too high. The voltage of CNC laser cutting machine is instability .

2. When CNC laser cutting machine start cutting, the direction is in the opposite?

The switch of laser cutting machine is bad.

3. The cutting shape of CNC laser cutting machine is changed or cutting overlapping graphics?

CNC laser cutting machine synchronous wheel screw and motor line was severed.

4. Can’t start CNC laser cutting machine ? Please check if the external circuit is connected. Pls check laser cutting machine connector and control transformers are right.
5. The cutting shape of CNC laser cutting machine big or small? Please check the Z axis is correct

IDMLASER CLAYA V-1325 is an economical fiber laser cutting machine. More detailed information pls visit:http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

How to analysis CNC table plasma cutting machine ?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/how-to-analysis-cnc-table-plasma-cutting-machine/

CNC table plasma cutting machine working according to the computer program instructions. When such a instruction to the NC control, the CNC cutting machine will cutting automaticly. CNC table plasma cutting machine including CNC system and plasma cutting table. Compared to traditional manual and semi-automatic cutting, CNC table plasma cutting machine cutting in high efficiency .

When table plasma cutting machine cutting stainless steel, we recommend nitrogen as the working gas in order to improve cutting efficiency. Nitrogen is better than air or oxygen as a conductive medium.

Nitrogen is used as a conductive medium, cutting characteristics, quality, and faster than air or oxygen cut cutting different. Nitrogen carrying heat assisted cutting, molten metal processing and blow the molten metal cut to achieve the purpose of cutting.

SteelTailor Legend B5II is an powerful table plasma cutting machine . It can cut as thin as 0.3mm , as thick as 22mm. More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

What’s the thickness can CNC laser cutting machine cut?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-thickness-can-cnc-laser-cutting-machine-cut/

The cutting thickness of CNC laser cutting machine is according to the material and the power of laser cutting machine.

1KW CNC laser cutting machine can cut 9mm thickness carbon steel. 1.5 KW laser cutting machine can cut 19mm thickness carbon steel.

2.5KW CNC laser cutting machine can cut 15mm stainless steel. For thicker stainless steel, we need 3KW laser cutting machine.

For carbon steel below 10mm, we can choose fiber laser cutting machine below 1000W. It is because laser cutting machine cutting width is narrow , generally between 0.1mm to 0.5mm. CNC laser cutting machine cutting precision is very high, less than 0.05mm.The hole center distance error is between 0.1mm to 0.4mm. Laser cutting machine cutting section is very smooth.

Carbon steel between 10mm to 20mm, we can choose 2000W to 6000W fiber laser cutting machine. Or 2000W CO2 laser cutting machine.

For thickness above 20mm carbon steel, we choose CNC plasma cutting machine is more economical .

IDMLASER CLAYA V is an economical fiber laser cutting machine. More detailed information pls visit:

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/how-does-cnc-fiber-laser-cutting-machine-work-steeltailor-claya/

Why table plasma cutting machine have these features?

This article is from SteelTailor blog:http://www.steeltailor.com/blog/why-table-plasma-cutting-machine-have-these-features/

Table plasma cutting machine main cutting materials are stainless steel,aluminum and carbon steel. Plasma cutting machine cutting in high efficiency. The cutting sample is very smooth. Table plasma cutting machine also can cut variety kinds of shapes.

Plasma is the fourth form of matter. Usually we know matter has three States: solid, liquid and gaseous . The three forms of water is ice, water and steam. The different of these three forms is the energy level. When we heated the ice increases its energy, ice will melt into water, more energy, water gasification becomes vapour, further increase the steam energy, gas ionization and ionization process makes the gases become conductors. These electrically, ionized gas called plasma. Plasma cutting machine use plasma to cut material.

Moreover, CNC plasma cutting machine has the characteristics of directional light emission, high power density. The cutting Precision can be 0.01 mm. Table plasma cutting machine cutting metal edges will smooth without burrs.

SteelTailor Yeah!Legend B5II table plasma cutting machine is an economical plasma cutting machine. It can cut as thin as 0.3mm and cut as thick as 22mm.

More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html

http://www.steeltailor.com/blog/steeltailor-table-plasma-cutting-machine/

What’s the disadvantage of CNC laser cutting machine?

IDMLASER CLAYA V-1325 CNC fiber laser cutting machine

This article is from SteelTailor blog:http://www.steeltailor.com/blog/whats-the-disadvantage-of-cnc-laser-cutting-machine/

CNC laser cutting machine is widely used in industry. Laser cutting machine have a lot of features. Many customer like it. What’s the disadvantages of CNC laser cutting machine?

There are two disadvantages of CNC laser cutting machine

1. The thickness of CNC laser cutting machine cut is limited. CNC laser cutting machine can cut Stainless steel only 16 mm at max. Carbon steel 25mm at max. Both in the best cutting effect.
2. The cost of CNC laser cutting machine is high . Because the parts of CNC laser cutting machine is expensive. So CNC laser cutting machine is expensive than plasma cutting machine and flame cutting machine.

IDMLASER CLAYA V is an economical fiber laser cutting machine. More detailed information pls visit:

http://www.steeltailor.com/sproducts/laser_cutting_and_marking_machines/id/IDMLASER%20CLAYA%20V-1325%20500W%20fiber%20laser%20cutting%20machine.html

http://www.steeltailor.com/blog/whats-the-disadvantage-of-cnc-laser-cutting-machine/

How to prevent table plasma cutting machine cutting error?

This article is from Steeltailor blog:http://www.steeltailor.com/blog/how-to-prevent-table-plasma-cutting-machine-cutting-error/

Table plasma cutting machine is widely used in modern industry. CNC cutting machine is more and more stable. If we don’t justify it well, table plasma cutting machine will cause error. How to prevent table plasma cutting machine cutting error?

Firstly, we should adjust the plate stable before table plasma cutting machine cutting. If the plate is not stable, it will cause big cutting error.

Secondly, we must adjust table plasma cutting machine warm-up time and cutting speed . If the warm-up time is too long, the plate will be deformated when cutting.

SteelTailor Legend B5II is an economical table plasma cutting machine.More detailed information pls visit:http://www.steeltailor.com/sproducts/sheet_matel_plasma_cutting_machine/id/Yeah%EF%BC%81Legend%20B5II%20Economical%20Table%20CNC%20Plasma%20Cutting%20Machine.html